Comfort Light Women's Insulated Air Sleeping Pad

Air Sprung Cells™ are the core technology used in Sea to Summit Air Mats and are the reason you will sleep more comfortably on a Sea to Summit mat than on a conventional air pad.

Inspired by the hundreds of springs found in a modern pocket sprung mattress, the hundreds of small interconnected chambers (called Air Sprung Cells™) perfectly support your weight and conform to your body contours.

The Comfort Light series of mats has an internal layer of 40 D Nylon in the torso section. This allows the welds of the lower and upper cells to be offset, resulting in a greater number of cells in this area for greater support and insulation. The cells in the head and leg sections of the mat do not have this internal layer, which saves overall weight.

This hybrid construction (two different weld patterns) may be the perfect option for an end user looking for more comfort and insulation without adding to much weight.

The Airstream™ Pumpsack is Sea to Summit's big volume mattress pump which we've now integrated into the stuff sack of every Air Sprung Cell™ mat.

The clever design opens at one end to stow the air mat and the other end unfolds to become the built-in pump. The Airstream™ Pumpsack can be inflated with a single breath and takes just two or three cycles to fill our mats. Not only is it faster than inflation by mouth, but there is minimal breath condensation entering the mat and it eliminates dizziness from blowing the mat up directly by mouth.

The Airstream™ Pumpsack is also compatible with Sea to Summit's smaller multifunction valve, which is now featured on the updated Aeros pillow range, along with the Air Seats.

To ensure that you will be warm when you sleep (especially when the ground is colder), it is essential to know how well your sleeping mat resists heat loss into the ground. This resistance is known as an R-Value. A laboratory-tested R-Value is the only way to measure resistance to heat loss

Sea to Summit has always provided independent lab-tested R-Values for its sleeping mats. Since January 2020 we have used the industry standard ASTM F3340 test to provide R-Values for our mats.

There are several other factors which will determine how well a sleeping mat will insulate, but the standardized ASTM R-Value test means you can compare resistance to heat loss in sleeping mats across different brands

Thermolite® HL-1 is part of the family of Thermolite® materials used in Sea to Summit sleeping bags, sleeping bag liners and sleeping mats.

HL-1 high loft insulation is a fiberfill constructed with a unique 3D crimp of hollow-core and solid fibers, which provides excellent lightweight warmth with superior durability. The Thermolite insulation lofts up inside the Air Sprung Cells™ of our sleeping mats to prevent convective heat loss from your warm body to the cold ground.

Sea to Summit Women’s Specific Sleeping Pads:

Built differently from the ground up, to provide women adventurers with the best possible sleep.

Both Air Sprung Cell and Self-Inflating mats have a shape that is narrower at the shoulder, then widest between the hips and knees to permit a natural side or ‘figure four’ sleeping position. Air Sprung Cell pads have more Thermolite® insulation than their Unisex counterparts. Self-Inflating pads have smaller-dimensioned Delta Cores in the hip and foot sections to create extra Comfort and Warmth Zones.

Sea to Summit Women’s Specific Sleeping Bags:

Engineered differently than Unisex models, to provide women adventurers with the best possible sleep.

They have a shape that is narrower at the shoulder, then widest between the hips and knees to permit a natural side or ‘figure four’ sleeping position. Women’s specific body mapping deploys insulation for warmth where it is most needed. Additionally, the Journey and Altitude down bags have a layer of Thermolite synthetic insulation in the footbox to warm your feet more quickly.

Journey, Altitude, and Venture can be zipped into many Sea to Summit Unisex sleeping bags.